Builders clean insurance is not a separate product with its own name on the certificate. It is a cleaning business policy that has been written and rated on the understanding that you work on construction sites, which usually means public liability at the limit your main contractor demands (£5 million is common, £10 million on larger or public sector jobs), employers' liability if anyone works for you, and some form of cover for damage you cause to the finished works you have been brought in to clean.
The reason this matters is simple. Many cleaning policies are priced for offices, homes and retail units. Construction work is often excluded or restricted, and a policy that is silent on site work can leave you arguing with an insurer at the worst possible moment. A sparkle clean on a new build involves blades on glass, chemicals on unsealed stone, water near live electrics, high level access, other trades working around you, and a building worth millions that is about to be handed over. The price of the cleaning contract bears no relation to the value of what you could damage.
This guide covers what counts as a builders clean, the risks insurers focus on, what principal contractors ask for in their pre-start paperwork, how damage to finished works is handled, and the checks worth doing before you accept your next site job. It is general guidance rather than advice about your own business, and cover always depends on the policy wording and the insurer's acceptance of your risk.
What counts as a builders clean, and why insurers treat it differently
Builders cleaning usually falls into three stages. The rough clean or first clean happens once the structure is up and the trades are still working: removing debris, sweeping, clearing packaging and making the site workable. The second clean, sometimes called the intermediate clean, follows first fix and plastering, and deals with dust, plaster splashes and screed residue. The sparkle clean or final clean is the handover clean, where glass is polished, protective film is stripped, silicone and paint specks are removed, sanitaryware is descaled and every surface is brought to a snagging standard.
Underwriters treat this as construction work rather than ordinary cleaning, for three reasons. First, the environment is unfinished and hazardous, so injury risk to your staff and to others is higher than in an occupied office. Second, the surfaces you touch are brand new and unprotected, so the cost of putting right a mistake is the cost of replacement rather than a repair. Third, you are usually a subcontractor in a chain, and the contract above you will push liability down towards you through indemnity clauses.
If your current policy was arranged for domestic work or office contracts and you have started taking site jobs, that change needs declaring. Insurers rate on trade activity, and the difference between an office cleaning policy and one that includes builders cleans is a real one. Our specialist and deep cleaning insurance pages set out the kind of work that normally sits in this category.
The site risks that drive builders clean insurance
Ask an underwriter what worries them about a builders clean and you will get a short, specific list.
- Glass damage. Scraping cement splatter, paint or silicone off new glazing with a blade is the single most common cause of large claims in this sector. Scratched units on a commercial frontage are replaced, not polished out, and replacement can involve access equipment and a manufacturer lead time. Many policies exclude damage to glass being worked on, or apply conditions about scraper use.
- Finished surfaces. Acidic descalers on unsealed limestone, the wrong pad on a resin floor, overspray onto freshly painted architraves, a trolley wheel through a new vinyl. On a handover clean there is nothing tired or second hand to blame.
- Water. A hose left running, a tap turned on before the waste is connected, or water pushed under a dry-laid floor. Water damage claims on a nearly finished building are expensive because they involve drying, replacement and delay.
- Working at height. Internal atria, stairwell glazing and high level ductwork mean steps, podiums, towers and sometimes a MEWP. The Work at Height Regulations 2005 apply to you exactly as they apply to the trades. Our guide to working at height and cleaning insurance explains how insurers ask about this.
- Chemicals and dust. Silica dust from screed and block cutting, plus strong acids and solvents used on site, bring you squarely within COSHH. If that is unfamiliar territory, start with COSHH explained simply.
- Other people's property. Plant, materials and tools belonging to the main contractor and other subcontractors are often stored in the areas you are cleaning.
- Theft of your own kit. Site cabins and locked containers are targets. Vacuums, rotary machines, poles and jet washers left overnight are a known exposure, which is why tools and equipment cover is worth sizing properly rather than guessing.
What main contractors ask for before you set foot on site
Principal contractors run pre-qualification on every subcontractor, cleaners included. Expect to be asked for most of the following, often through an online portal and often with a deadline that lands the day before you are due to start.
- Public liability certificate showing a limit of indemnity (the most the insurer will pay for any one claim) that meets the contract. £5 million is the usual floor, £10 million appears on larger commercial, rail, healthcare and local authority schemes. We cover how to judge this in our guide to public liability limits for cleaning contracts.
- Employers' liability certificate at a minimum of £5 million, which is the legal requirement under the Employers' Liability (Compulsory Insurance) Act 1969 if you employ anyone. Most policies are issued at £10 million as standard. The HSE can fine up to £2,500 for each day you trade without it.
- Site-specific RAMS (risk assessment and method statement) covering your tasks, chemicals, access equipment and waste.
- COSHH assessments and safety data sheets for every product you bring on site.
- Training and competence records, including PASMA for mobile towers, IPAF for powered access and abrasive wheels if anyone cuts anything.
- CSCS cards for everyone attending site, plus a site induction before first entry.
- Health and safety policy in writing if you have five or more employees.
Read the contract conditions as well as the checklist. Two clauses matter most. An indemnity to principal clause requires your public liability policy to extend cover to the main contractor for liability arising from your work, and most commercial cleaning policies can do this. A contractual liability or hold harmless clause can go further, making you responsible for losses you would not be liable for at common law, and insurers do not always follow that. If the wording feels one-sided, send it to your broker before you sign rather than after a claim.
Do cleaners need a CSCS card for builders cleans?
There is no law that says you must hold a CSCS card. There is, however, a near-universal site rule that says you cannot come through the gate without one, so in practice it is a commercial requirement. For cleaning operatives the usual route is a Labourer card, which generally requires a Level 1 Award in Health and Safety in a Construction Environment and a pass in the CITB Health, Safety and Environment test. Some contractors accept cards issued under other schemes carrying the CSCS logo, so confirm what your client will take before paying for training.
Cards sit alongside, not instead of, the duties in the Construction (Design and Management) Regulations 2015. As a contractor on a construction project you have duties to plan, manage and monitor your own work, provide information and instruction to your workers, and cooperate with the principal contractor. Insurers do not police CDM, but a claim file that shows no RAMS, no induction record and no competence evidence makes a liability claim far harder to defend. Our guide on the true cost of a cleaning claim explains how much of the damage sits outside the repair bill.
Damage to finished works: the gap that catches builders cleaners out
Public liability covers injury to other people and damage to their property. Standard wordings then carve out damage to property being worked upon, meaning the actual item or surface you were cleaning when things went wrong. On a builders clean that carve-out is a problem, because the property being worked upon is the entire finished building.
Insurers handle this in different ways. Some grant a limited amount of cover for damage to property worked upon, often with its own inner limit and a higher excess (the first part of any claim you pay yourself). Some exclude glass entirely. Some will cover it only if blades and scrapers are not used on glazing, or only if you follow the glass association guidance on removing residue. There is also a related issue known as treatment risk, where the service itself goes wrong rather than an accident happening, which we explain in our guide to treatment risks and the gap in standard public liability.
| Scenario on a builders clean | How it is usually treated |
|---|---|
| Visitor slips on a wet floor you left unsigned and breaks a wrist | Public liability, subject to limit and excess |
| Your operative knocks a stored kitchen worktop off trestles and cracks it | Public liability, third party property damage |
| Blade scratches to new glazing during sparkle clean | Often excluded or restricted; needs specific agreement with the insurer |
| Acid cleaner etches new sanitaryware you were descaling | Damage to property worked upon; depends on whether that extension applies |
| Hose left running, water tracks into the floor below | Usually public liability, but check water damage conditions |
| Your rotary machine stolen from a site container overnight | Tools and equipment section, if site storage is declared and covered |
| Employee develops a hand condition after months of chemical exposure | Employers' liability |
| Contractor claims your late clean delayed handover | Usually a contractual or financial loss, not covered by liability policies alone |
That final row deserves attention. Pure financial loss, such as a contractor claiming liquidated damages because handover slipped, does not sit under public liability. Where a cleaning or facilities business gives advice, writes specifications or takes on service level obligations, professional indemnity cover is the section that responds, and some tenders now ask for it by name.
Which covers a builders clean business usually needs
Most site cleaning firms build their programme from the same components, scaled to the size of the job.
- Public liability at the limit your contracts demand. See public liability insurance for cleaners for how the cover works.
- Employers' liability for employees and, importantly, for labour-only subcontractors. If you supply the materials and equipment and direct how the work is done, insurers generally treat that person as an employee for cover purposes. Our guide to labour-only subcontractors and your cleaning insurance sets out the questions to ask before you put anyone on a gate pass.
- Tools, equipment and machinery, including cover for items left in a vehicle or site store overnight if the policy allows it. Read the security conditions carefully; many require a locked, immobilised vehicle or a specified type of container.
- Damage to property worked upon or an equivalent extension, with the glass position confirmed in writing.
- Goods in transit and hired-in plant if you move equipment between sites or hire access platforms and scrubber driers.
- Personal accident for working directors and self-employed operatives who have no sick pay to fall back on.
If builders cleans are one strand of a wider business that also holds regular maintenance contracts, a single contract cleaners policy can usually house everything, provided every activity is declared. Telling an insurer about the office contracts and leaving out the site work is the mistake to avoid.
Telling your insurer the full picture
Commercial insurance buyers have a duty of fair presentation under the Insurance Act 2015. In plain terms, you must disclose everything a prudent insurer would want to know, in a clear and accessible way, and that includes the things nobody specifically asks about. For a builders clean business, the facts that matter are usually these:
- The split of your turnover between site work and other cleaning.
- The largest single contract value and the type of buildings (residential block, school, hospital, data centre, rail).
- Whether you use blades or scrapers on glass, and the method you train staff to follow.
- Maximum working height and the access equipment used.
- Whether anyone handles hot works, confined spaces, asbestos-adjacent areas or live electrical plant.
- Numbers of employees, labour-only and bona fide subcontractors, with wage rolls for each.
- Any claims or incidents in the last five years, including ones you settled yourself.
Get that presentation right and a claim is far less likely to be disputed. Get it wrong and the insurer may be able to reduce or decline a payout, or treat the policy as if it had never existed. If your work changes mid-year, for example you take your first £2 million new build job having only done refurbishments, tell your broker then rather than at renewal. You can start that conversation through our specialist cleaning insurance enquiry form, which asks about site work, access equipment and glass methods rather than generic questions written for every trade.
A practical pre-site checklist
Run through this before you price the job, not after you have won it.
- Read the subcontract or order for the required public liability limit, indemnity to principal wording, and any requirement to name the contractor as an additional insured.
- Check your policy schedule actually shows construction or builders cleaning as a declared activity.
- Confirm in writing with your broker how glass damage and damage to property worked upon are treated, and what the excess is for each.
- Price the access equipment properly. If the atrium glazing needs a MEWP, you need an IPAF operator and the hired-in plant cover to match.
- Write a site-specific RAMS rather than reusing last job's document with the address changed.
- Collect safety data sheets for every chemical and make sure the COSHH assessments reflect the actual site ventilation.
- Check CSCS cards are valid and in date for everyone on the gate pass list, including anyone you are bringing in for one week.
- Agree in writing who protects finished surfaces before you clean, and photograph the condition of glazing, floors and sanitaryware on arrival. Photographs settle more arguments than any other single habit.
- Confirm overnight storage arrangements for your equipment and check those arrangements meet the security conditions in your policy.
- Record near misses and damage honestly. Our guide on handling accidental damage explains why early reporting helps your position.
- Keep certificates of employers' liability for at least 40 years, as long-tail disease claims can arrive decades later.
Getting cover arranged for builders cleans
Site work is perfectly insurable. It just needs describing accurately, because the difference between a policy that follows you onto a construction site and one that does not is rarely obvious from the front page of a schedule. Limits, glass terms, excesses and subcontractor definitions are where the detail lives.
If you are quoting for a sparkle clean, moving from domestic contracts into site work, or you have been sent a pre-qualification pack asking for £10 million and you are not sure what you hold, tell us about the work and we will go to insurers who understand it. Start with our specialist cleaning insurance quote page, or browse the full range of cleaning insurance covers and guides first. Cover, terms and price depend on your circumstances and the insurer's assessment, and nothing here is advice about your own policy.